Lockdown code words for schools: what to use and what to avoid

Lockdown code words for schools: what to use and what to avoid

There is no single national code word for school lockdown in the UK, so each school chooses its own wording and sets it out in its lockdown policy. Many schools find that a short, plain instruction such as "Lockdown, lockdown, lockdown" is easier for supply staff, visitors and pupils to understand than a secret code word. If you do use a code word, brief it, practise it and back it up with a message that everyone can see.

Table of contents

Key takeaways

What are lockdown code words for schools?

A lockdown code word is a pre-agreed word or short phrase that tells staff to secure the building because a threat is nearby. Some schools use it instead of the word "lockdown" so that the signal does not alarm younger pupils or alert someone listening in.

The code word is only one part of a lockdown procedure. A lockdown secures a building so that people cannot get in or out. The full procedure also covers who makes the call, what each person does next, and how the all clear is given. Our lockdown procedure and protocol guide covers those steps in more detail.

Should schools use code words or plain language?

For most schools, plain language is the more reliable choice, because it needs no prior knowledge to understand. A code word only works if everyone on site knows it, and a school is full of people who may not: supply teachers, new starters, peripatetic staff, contractors, volunteers and visitors.

Code words do have a place. A calm phrase can avoid frightening very young children, and some settings prefer not to announce a threat to anyone who might overhear. The trade-off is that every adult must remember the phrase under stress.

A sensible middle route is to use plain language for the instruction itself and keep any softer wording for what you say to children afterwards. Your policy should say which wording is used for which audience.

What kinds of lockdown wording do schools use?

Schools generally use one of four approaches: plain instruction, a single code word, a code phrase, or colour or number codes. Each has a different strength and a different weakness, as the table shows. The examples are illustrations, not recommendations.

ApproachExample wordingMain strengthMain risk
Plain instruction"Lockdown, lockdown, lockdown"Understood at once by visitors, supply staff and contractors with no briefingCan be alarming for very young children if used without explanation
Single code wordA word chosen by the school and kept in the policyShort, quick to say, and does not announce the threat to people nearbyStaff who were not briefed, or who have forgotten it, may not act
Code phraseA short sentence agreed in the policyLess likely to be said by accident than a single wordLonger to say and easier to mishear in a noisy corridor
Colour or number codeA colour or number that maps to an actionCan carry several meanings, such as lockdown and evacuation, in one systemEasy to confuse with other colour systems, and hard to remember for rare events

Whichever you choose, avoid words that people say in ordinary conversation. A word that turns up in a lesson or in the playground will be mistaken for a real signal, or ignored.

How do you choose lockdown wording for your school?

Start with who must understand the signal, then choose the simplest wording that works for all of them. These steps help:

  1. List everyone on site. Include pupils, teaching and support staff, supply staff, contractors, visitors and anyone running an after-school club.
  2. Pick one signal per procedure. Lockdown, evacuation and invacuation must sound different. Our invacuation guide explains how invacuation differs from lockdown.
  3. Write it into your policy. The exact words, who can call them and what each adult does next should be on one page.
  4. Add a second route. Never rely on a voice, bell or radio alone.
  5. Brief everyone, including new arrivals. Put the wording into induction packs and visitor briefings.
  6. Test it and review it. Change the wording if drills show confusion.

According to the Department for Education's school and college security guidance on GOV.UK, schools should plan for how they would respond to an incident and practise that plan. Your chosen wording is part of that plan.

What should an on-screen lockdown message say?

An on-screen lockdown message should say "LOCKDOWN" in large type, give the one or two actions to take now, and stay on screen until an all clear. It should be short enough to read in a second and complete enough to act on without anyone asking a question.

A good message usually covers:

Lockdown Alert shows your own wording, colours and sound as a full-screen, audible message on every enrolled Windows PC and on any screen with a browser, such as a wall display. Staff and pupils see the same message on PCs, Macs, phones, tablets and wall screens at the site within seconds. It stays up until ALL CLEAR or the auto-close time you set.

Because you write the message, it can use your school's chosen word or plain language. Neither choice changes how the alert is delivered.

How should schools practise lockdown wording?

Practise with drills that are clearly drills, then review what staff understood. A code word that has never been used in a rehearsal is likely to be forgotten, and an unmarked drill can cause real alarm.

Lockdown Alert drills always look like drills: they appear in amber with a TEST badge, so nobody mistakes a rehearsal for the real thing. When the drill ends, an ALL CLEAR stands every screen down.

After each drill, ask a few direct questions:

The Lockdown Alert portal records who started each alert or drill, when, how many screens showed it and when it cleared. That gives school business managers and headteachers a record to share with governors and inspectors.

Does Martyn's Law say which words schools must use?

No. Martyn's Law does not set any lockdown wording, and it does not require any particular product or equipment. It is the common name for the Terrorism (Protection of Premises) Act 2025, which is named after Martyn Hett, one of those killed in the Manchester Arena attack in 2017, as Wikipedia's Martyn's Law entry explains.

The Act received Royal Assent on 3 April 2025, with an implementation period of at least 24 months. The Security Industry Authority (SIA) is the regulator and has said it expects the duties to start in spring 2027, but no date is confirmed.

Schools are always standard tier. The standard tier asks for public protection procedures: evacuation, invacuation, lockdown, and communicating with people on site. How you word the signal is your decision. Our page on Martyn's Law for schools and premises sets out who the Act applies to and where a lockdown alert fits.

For wider counter-terrorism guidance, ProtectUK publishes advice for organisations and venues.

FAQs

Do UK schools use code words for lockdown?

Some do and some do not. There is no national standard, so each school sets its own wording in its lockdown policy. Many choose plain language so that visitors and supply staff understand without a briefing.

What is a good lockdown code word for a school?

The best word is one that no one says in ordinary conversation, that is short enough to say under stress and that every adult on site has been taught. Plain language, such as "Lockdown", needs no teaching at all. Whatever you choose, write it in your policy and practise it in drills.

Should pupils be told the lockdown code word?

That depends on the age of the children and your policy. Younger pupils usually respond to a simple instruction from the adult in the room, while older pupils may be briefed on the wording. Staff should always know it.

Can a school use screens instead of an announcement?

Screens can carry the message alongside announcements, not instead of them. A PA, bells, radios and verbal commands remain part of any plan. Lockdown Alert works alongside them by putting a full-screen message on every enrolled PC and browser screen at the site.

Does Martyn's Law require a lockdown code word?

No. The Act does not set any wording and does not require any particular product or equipment. It asks standard tier premises, which always include schools, to have public protection procedures such as lockdown, invacuation and evacuation, plus a way to communicate with people on site.

How can you make sure every classroom gets the message?

A code word tells staff what to do, but only if they hear it. A second route, such as a message on every screen, helps reach classrooms, offices and outbuildings where an announcement is missed.

Lockdown Alert lets you start a lockdown by dialling a number on any desk phone, pressing a panic button, sending an email, or one click in the portal. It uses the phone system the site already has, and the integrations page lists the other ways to start an alert. IT leads can read the Intune deployment guide to see how the Windows app is rolled out, and the support page shows how to contact the team with questions.

Lockdown Alert helps schools and businesses prepare and supports the communication part of their procedures. It does not replace your policy, your training or your PA, bells and radios. There is a 30-day free trial with no card needed, then pricing starts from £350 per site per year, with data hosted in the UK.

Start your free trial of Lockdown Alert

This article is general information, not legal advice. Check the Home Office statutory guidance and the Security Industry Authority for the current position on Martyn's Law.