Wired bell change and lockdown system for schools: how to combine them
A school's wired bell system can carry a lockdown signal, but most schools get a clearer and quicker result by keeping the bell for lesson changes and fire, and adding a separate lockdown alert that shows a written instruction on every screen. Staff need to know within seconds that a lockdown has started and what to do next, and a full-screen message in the school's own words leaves less room for doubt than a tone they hear once a term.
This guide is for school business managers, headteachers and trust estates and IT leads. It covers what a wired bell change system can and cannot do in a lockdown, how a screen-based alert fits alongside it, and what Martyn's Law does and does not ask for.
Table of contents
- Can a school's wired bell system be used for lockdown?
- What are the limits of relying on bells alone for lockdown?
- How does a screen-based lockdown alert work alongside a wired bell system?
- How do bells, PA and screen alerts compare for lockdown?
- How should a school set out its bell change, fire and lockdown signals?
- Does Martyn's Law require a lockdown bell or alarm?
- How much does a lockdown alert system cost for a school?
- FAQs
- Give every classroom a clear lockdown instruction in seconds
Key takeaways
- A wired bell change system can sound a distinct lockdown tone, but a tone cannot tell staff where the threat is or what to do.
- Many schools keep the bell for lesson changes and fire, and use a separate screen-based alert so lockdown cannot be mistaken for either.
- Lockdown Alert shows a full-screen lockdown message on every enrolled PC and screen at a site, started from a desk phone, a panic button, an email or the web portal.
- The Terrorism (Protection of Premises) Act 2025 does not require any particular product or equipment, including a lockdown bell.
- Lockdown Alert offers a 30-day free trial with no card needed, then costs from £350 per site per year, with UK hosted data.
Can a school's wired bell system be used for lockdown?
Yes, many wired bell change systems can play a different tone or pattern for lockdown, and some schools already use one. Whether it works well depends on whether every person on site can hear it and tell it apart from the lesson change and fire signals.
A wired bell system was designed to mark the timetable. It is reliable for that job because it rings at the same times every day. Using it for lockdown means adding a rare, unfamiliar signal to a system staff and pupils have learned to tune out.
If your bell controller supports a separate lockdown tone, it is worth asking your bell supplier how it is triggered, who can trigger it and whether it can be started from more than one place. A signal that can only be started from the school office is no use if the threat is at the office.
What are the limits of relying on bells alone for lockdown?
The main limit is that a bell only says "something is happening", not what is happening or what to do. In a lockdown, staff need to know whether to lock down, where the threat is, and when it is over.
Common problems schools report when a bell is the only lockdown signal include:
- Confusion with fire. A continuous or unusual bell can lead people to evacuate, which is the opposite of what lockdown needs. Our guide to lockdown, invacuation and evacuation explains why the difference matters.
- Coverage gaps. Sports halls, music rooms, outdoor areas and new blocks are sometimes not on the bell circuit, or the bell is too quiet to hear over activity.
- No detail. A tone cannot say "threat near main entrance, stay away from the front of the building".
- No clear end. Schools often rely on a second tone or a staff member going room to room to stand down, which takes time.
- No record. A bell controller usually does not log who started the signal, when, or when it stopped.
None of this means removing the bell. A PA, bells, radios and verbal commands remain part of any sound lockdown plan. The aim is to add something that fills the gaps.
How does a screen-based lockdown alert work alongside a wired bell system?
A screen-based alert puts a written lockdown instruction on every computer and display at the site at the same moment, while the bell, PA and radios carry on doing their usual jobs. Staff hear the signal and read exactly what it means.
With Lockdown Alert, someone starts a lockdown in one of several ways:
- dialling the lockdown number on any desk phone on the school's existing phone system
- pressing a wireless panic button under a desk or on a key fob
- sending an email to the school's lockdown address
- tapping the red button in the web portal
- pressing a button on the door intercom
Every enrolled Windows PC, and every screen with a web browser, goes full screen within seconds. That includes Macs, phones, tablets and wall-mounted TVs. The message uses the school's own wording, colours and sound, and stays up until someone sends ALL CLEAR, which stands every screen down at once, or until the auto-close time is reached.
The full list of ways to start an alert is on our integrations page. For IT leads, the Windows app can be pushed to devices centrally; our Microsoft Intune deployment guide walks through it.
Because the screen alert is separate from the bell circuit, it does not depend on a room being wired for the bell. Any classroom with a display or a staff laptop can show the message.
How do bells, PA and screen alerts compare for lockdown?
Each method does a different job, and most schools use more than one. The table below sets out what each can and cannot do during a lockdown.
| Method | What it does well in a lockdown | Where it falls short in a lockdown |
|---|---|---|
| Wired bell change system | A distinct lockdown tone can reach every room wired to the bell circuit at once | A tone cannot explain the threat, its location or what staff should do |
| PA or tannoy system | A spoken announcement can give detail about the threat and the action needed | It relies on someone reaching the microphone, and spoken words can be misheard in a noisy room |
| Staff radios | Radios let named staff talk to each other in real time during the incident | Radios reach only the staff carrying them, not every classroom |
| Full-screen alert on every PC and screen | A written message in the school's own wording appears on every enrolled screen within seconds | It reaches only rooms with a screen, so it works alongside audible signals rather than replacing them |
| Verbal commands | A staff member can give clear, local instructions to the people in front of them | Verbal messages spread slowly and change as they are passed on |
How should a school set out its bell change, fire and lockdown signals?
Write down one signal for each event, make sure they sound or look different, and practise each one. Every member of staff should be able to say what each signal means without checking.
A simple approach many schools use:
- Lesson change: the normal wired bell, unchanged.
- Fire: the fire alarm only, never the class change bell.
- Lockdown: a full-screen written message plus a distinct audible signal, with a PA announcement where one is available.
- All clear: an ALL CLEAR message on every screen, confirmed by a named person.
Put these in your written policy. Our lockdown policy template for schools has a section for signals you can copy and adapt.
Drills matter as much as the signals. With Lockdown Alert, practice drills always look like drills, with a different colour and a clear practice label, so nobody mistakes a drill for a real lockdown. Our guide to running a school lockdown drill covers planning, timing and review.
After each alert or drill, the portal records who started it, when, how many screens showed it and when it cleared. That gives governors and inspectors a plain record of what happened.
Does Martyn's Law require a lockdown bell or alarm?
No. The Terrorism (Protection of Premises) Act 2025, known as Martyn's Law, does not require any particular product or equipment, so a lockdown bell or alarm is not specified.
The Act received Royal Assent on 3 April 2025 with an implementation period of at least 24 months. The Security Industry Authority is the regulator and has said it expects the duties to start in spring 2027, although no date is confirmed.
Premises where 200 to 799 people can be present fall into the standard tier, and premises for 800 or more fall into the enhanced tier. Schools are always standard tier. The standard tier asks for public protection procedures covering evacuation, invacuation, lockdown and communicating with people on site.
That last point is where signals come in. How you tell people a lockdown has started is part of your procedures, whichever method you choose. Lockdown Alert helps schools and businesses prepare and supports the communication part of those procedures; it does not by itself make a premises meet the law. Our page on Martyn's Law for schools explains the duties in more detail, and ProtectUK publishes counter-terrorism guidance for premises.
How much does a lockdown alert system cost for a school?
Lockdown Alert costs from £350 per site per year, after a 30-day free trial with no card needed. Data is hosted in the UK.
Changes to a wired bell system, such as adding a lockdown tone or extending the circuit to new buildings, are priced by bell suppliers and vary by site, so ask your current supplier for a quote. Lockdown Alert does not supply or install bell systems; it works alongside the bell, PA and radios you already have.
For trusts running several schools, our buyer's guide for multi academy trusts covers standardising one approach across sites. If you have questions while setting up, our support page is the place to start.
FAQs
Can we use our class change bell as a lockdown alarm?
You can if your bell controller supports a distinct tone, but a tone alone cannot tell staff what is happening or what to do. Many schools keep the bell for lesson changes and add a written lockdown message on screens so the instruction is clear.
Do we need to replace our wired bell system to add lockdown alerts?
No. A screen-based lockdown alert such as Lockdown Alert runs separately from the bell circuit, using your existing phone system, PCs and screens. Your bell, PA and radios stay in place and remain part of your plan.
Is a lockdown bell a legal requirement for schools?
No. The Terrorism (Protection of Premises) Act 2025 does not require any particular product or equipment. It asks standard tier premises, which include all schools, for public protection procedures that cover lockdown and communicating with people on site.
How do staff tell a lockdown drill from a real lockdown?
Use a signal for drills that looks clearly different from a real alert. In Lockdown Alert, drills always appear in a different colour with a clear practice label, so staff can see at a glance that it is a practice.
What happens in rooms without a computer or screen?
Rooms without a screen still need an audible signal, such as a bell tone, PA announcement or a staff member with a radio. Lockdown Alert can show on phones and tablets as well as PCs, Macs and wall screens, which helps reach staff away from a desk.
Give every classroom a clear lockdown instruction in seconds
Keep your wired bell for lesson changes and add a lockdown message every member of staff can read. Try Lockdown Alert free for 30 days with no card, then from £350 per site per year. In a real emergency, always contact the police.
Start your free 30-day trial of Lockdown Alert
This article is general information, not legal advice. Check the Home Office statutory guidance and the Security Industry Authority for the current position on Martyn's Law.