School lockdown button: what it is and how it works in UK schools

School lockdown button: what it is and how it works in UK schools

A school lockdown button is a single action, such as a wireless panic button press, a phone call or a click in a web portal, that starts a lockdown alert across the whole site. With Lockdown Alert, that action puts a full-screen lockdown message on every PC, Mac, phone, tablet and wall screen at the school within seconds. It sits alongside the PA, bells, radios and verbal commands a school already uses, and does not replace them.

Table of contents

Key takeaways

What is a school lockdown button?

A school lockdown button is any one-step trigger that starts a lockdown alert for a whole school site. It might be a physical panic button under a desk, a red button in a web portal, or a button on a door intercom.

The button does not lock doors or close shutters. Its job is communication: it tells every person and every screen on site, at the same moment, that a lockdown is under way. The school's own procedure then tells staff what to do next.

If you are new to the topic, our lockdown procedure guide explains what a lockdown is and what a good protocol contains. According to Wikipedia's entry on lockdowns, a lockdown is a protocol that restricts movement into, out of or within a building during a threat.

Why do schools use a lockdown button?

Schools use a lockdown button because the first minute of an incident is when clear, consistent communication matters most. A member of staff in reception should be able to start the alert in one action, without searching for a phone list or walking to a PA microphone.

A button also removes the need to rely on one person. Anyone who has been shown how can start the alert, from an office, the front desk or a classroom.

Common reasons schools add a button include:

How does a school lockdown button work with Lockdown Alert?

When someone starts a lockdown in Lockdown Alert, every enrolled Windows PC and every screen with a browser at that site goes full screen at once. The message uses the school's own wording, colours and sound, and stays on screen until ALL CLEAR or the auto-close time.

The alert appears on PCs, Macs, phones, tablets and TVs. Where a device can run the app, you install it. Elsewhere, you open the wall display in any web browser, which suits corridor screens and reception TVs.

The portal then records who started each alert or drill, when it started, how many screens showed it and when it cleared. That record is useful for governors, trustees and inspectors who ask how the school prepares.

You can read more about the school setup on our school lockdown system page, or see the whole service on the Lockdown Alert homepage.

What are the ways to start a school lockdown?

Lockdown Alert can be started in six ways, so a school can choose the trigger that suits each part of the site. Each row below describes one method and where it fits.

MethodHow it starts a lockdownWhere it suits
Desk phoneDial the lockdown number on any desk phone the school already hasOffices, classrooms and staffrooms with existing handsets
Panic buttonPress a button under the deskReception and the school office, where a hand is not free to dial
EmailSend a message to the site's lockdown email addressStaff away from a phone who still have access to email
PortalTap the red button in the web portalSenior leaders and IT staff working on a computer
Door intercomPress a button on the door intercomMain entrances, where visitors are first met
CCTV alarm ruleLet a CCTV alarm rule fire the alertSites that already use CCTV alarm rules and want them to trigger a message

For details on the physical buttons, see our page on panic buttons and key fob buttons. The integrations page lists the systems that can start an alert.

Lockdown Alert does not supply or fit door locks, access control hardware, CCTV or PA systems. It works alongside whatever the school already has.

Does Martyn's Law require a school lockdown button?

No. Martyn's Law, the Terrorism (Protection of Premises) Act 2025, does not require any particular product or equipment, so no school is obliged to buy a lockdown button. It asks premises to have procedures in place, and a button is one way to support the communication part of those procedures.

The Act received Royal Assent on 3 April 2025, with an implementation period of at least 24 months. The Security Industry Authority (SIA) is the regulator and has said it expects the duties to start in spring 2027, but no date is confirmed. The duties are not yet in force.

Premises where 200 to 799 people can be present are standard tier, and premises with 800 or more are enhanced tier. Schools are always standard tier. The standard tier asks for public protection procedures: evacuation, invacuation, lockdown, and communicating with people on site.

Lockdown Alert helps schools prepare and supports the communication part of those procedures. It does not make a school meet the law on its own, because the law is about a school's whole set of procedures and not a single tool. Our Martyn's Law page for schools explains the Act in plain English, and Wikipedia's article on Martyn's Law gives the background to the campaign.

How should schools practise with a lockdown button?

Schools should practise with a lockdown button through regular drills that look clearly different from a real alert. A drill that nobody mistakes for a real event lets staff rehearse the procedure without alarming pupils or parents.

In Lockdown Alert, drills always look like drills. Every drill screen carries a clear drill marking, so nobody mistakes a practice for the real thing. When the drill ends, an ALL CLEAR stands every screen down.

A sensible drill routine covers:

  1. Choose a trigger. Rotate between the desk phone, a panic button and the portal so more staff have used each one.
  2. Brief the right people. Tell staff a drill is planned, and agree what pupils will be told.
  3. Run the drill. Start it, follow the procedure, and use the PA, radios or verbal commands as you normally would.
  4. Stand down. Send the ALL CLEAR and confirm every screen has cleared.
  5. Review the record. Check the portal for who started it, when, how many screens showed it and when it cleared, then note what to improve.

Our guide to invacuation is useful here, as many schools practise bringing people inside as well as locking down.

What should IT and estates teams check first?

IT and estates teams should first check which devices need to show the alert, and who needs to be able to start one. These two answers shape everything else.

Start with a short list:

If you have a question that is not covered on the site, the support page shows how to reach the team.

Keep your PA, bells, radios and verbal commands in the plan. A screen alert adds a further channel, particularly for people at computers, and does not take over from the others.

How much does a school lockdown button system cost?

Lockdown Alert costs from £350 per site per year, and every new customer gets a 30-day free trial with no card needed. Data and support are UK hosted.

The trial lets a school try the alert on its own screens and phones before paying anything. That is a practical way to see how the full-screen message looks in a real classroom and how quickly it appears.

ItemDetail
Free trial30 days, no card needed
PriceFrom £350 per site per year
Devices coveredPCs, Macs, phones, tablets and TVs
HostingUK hosted data and support

Multi-academy trusts can look at the partner programme if they work with a reseller or supplier, though the main site is the best place to check current terms.

FAQs

What is a school lockdown button?

A school lockdown button is a single action, such as pressing a panic button, dialling a number or clicking in a portal, that starts a lockdown alert across a school site. It tells everyone on site at once. It does not lock doors itself.

Can a school lockdown button replace a PA system or bells?

No. A PA, bells, radios and verbal commands remain part of any lockdown plan. Lockdown Alert works alongside them and adds a full-screen message on every PC, Mac, phone, tablet and wall screen at the site.

No. Martyn's Law, the Terrorism (Protection of Premises) Act 2025, does not require any particular product or equipment. The SIA has said it expects the duties to start in spring 2027, but no date is confirmed, and schools are always standard tier.

Can we test a school lockdown button without frightening anyone?

Yes. In Lockdown Alert, drills always look like drills, with a clear drill marking on screen. An ALL CLEAR then stands every screen down, and the portal records the drill.

How much does a school lockdown button cost?

Lockdown Alert costs from £350 per site per year. There is a 30-day free trial with no card needed, and data and support are UK hosted.

Which devices show the lockdown alert?

PCs, Macs, phones, tablets and TVs can all show the alert. You install the app where a device can run it, or open the wall display in any web browser.

Start a free trial and see a lockdown alert on your own screens

A lockdown button is only useful if staff trust it and have practised with it. The 30-day free trial, with no card needed, lets your school try each trigger, run a drill and read the record afterwards before you decide anything.

Start your free Lockdown Alert trial

This article is general information, not legal advice. Check the Home Office statutory guidance and the Security Industry Authority for the current position on Martyn's Law.